Hello Guest

Rotary powered Samurai

  • 4 Replies
  • 2728 Views

0 Members and 1 Guest are viewing this topic.

Rotary powered Samurai
« on: July 22, 2011, 05:14:55 PM »
Just wanted to sahre with everyone a killer Samurai I saw on CL in Clearwater FL, if it was a 4X4 I would of bought it in a minute to go muddin double Japaenese Style

http://tampa.craigslist.org/pnl/cto/2497579745.html

have a rotary powered samurai will sell or trade for the right offer. cash, trades, cash and trade. here is everything i have done to it

a just rebuild half bridge port 12a every thing was replaced at rebuild EVERYTHING. used solid corner seals and 93+ corner seal springs. it might have 100 miles
on the pictures it has a holley but i sold it and it now has a webber side draft carb holley blue pump and fuel regulator
msd blaster 2 ignition coils
the front end was converted 2x4 done the right way machined and welded the right way
it has a 3 row 4 pass aluminum radiator
a rotary shack oil cooler ( its a little bit thicker than stock) braided lines
the wiring was completely replaced with an ez wiring kit
all gauges are electrical
the speedo was converted from mechanical to electrical with a custom made converter
gauges are marshall instrument scx pro they light up white or orange. gauges have alarms that can be calibrated to blink orange when they go off
petroworks custom aluminum dash
front seats are from a 1st gen supra
mickey thompsons sportman tires on the rear
full custom racing beat exhaust
brand new stage 3 pressure plate and clutch
new custom made drive shaft and new u joints
differential is a danna 44 with brand new 4.56 gears and bearings and seals
custom made traction bars
paint is lamborgini orage (pearl)
has a back seat
also have new carpet not yet installed
im sure im forgetting stuff but EVERYTHING is new
send me your offer all i could say is no but also dont insult me with a low ball offer email me or text me 727-543-0601

you can see some of the build here http://www.cardomain.com/ride/3877252

need to sell really flexible on price $6000 obo again im really flexible on price radio not included
 
this is a new post my other one kept getting flaged, please email me before flaging and tell me why so i can fix my post



01 Tracker - OME Springs, 2" MK1 Body Lift, Warn 6K Winch, 18x9 Wheels, Rear Roll Cage and more.  95 Tracker with all Calmini bolt ons.  96 X-90 with mini lift and Super Swampers, this one has A/C and is an auto, nice.

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Rotary powered Samurai
« Reply #1 on: July 22, 2011, 08:04:12 PM »
A guy out here in Cal had one like that, handle of Rotozuk, thing was fast
but then he dropped in a turbo eagle Talon engine, still was very fast

Wild
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.

*

Offline Jonny Rash

  • 1094
  • 21
  • Gender: Male
  • Too many Samurais, too many little boys!
Re: Rotary powered Samurai
« Reply #2 on: July 24, 2011, 05:48:54 PM »
I'd like to make a 2wd lowered Samurai with a rotary.  However, the output of the earlier engines really are not the much more powerful of 1600 16-valve Suzuki engine.
35 years of Samurai ownership, and I still have my very first one. :)

Re: Rotary powered Samurai
« Reply #3 on: July 25, 2011, 09:30:22 AM »
Quite a few YouTube vids out there of rotary-powered Samurais. I think I've watched every one of them. LOL

I still dream of having a V8-powered 2WD Sidekick. You know, something like this:



Mine would have to be street legal and a bit "sleepy" looking.  >:D

- Andy
GO PREPARED! www.WARN.com
Like us on Facebook: Facebook.com/WARNfans
Follow us on Twitter: Twitter.com/WarnIndustries

*

Offline Jluck

  • 1389
  • 40
  • Gender: Male
Re: Rotary powered Samurai
« Reply #4 on: July 25, 2011, 11:37:31 AM »
I'm dreaming of a X90 with a 2.7 bi-turbo Audi power plant. :)
life is 10% what happens to you and 90% what you do about it!