Hello Guest
« previous next »
Pages: [1]   Go Down

Samurai body mount bushing help

  • 4 Replies
  • 2012 Views

0 Members and 4 Guests are viewing this topic.

*

jplowman2005

Samurai body mount bushing help
« on: February 09, 2008, 02:19:25 PM »
so today i went out to put my 2" body lift on and everything went pretty smooth, but on my 6 middle mounts the bushings fell apart when i took them off...i ordered new Polyurethan bushings today from http://www.wheelersoffroad.com/serviceparts.htm ...but my question is when i took the bushings out it looked like there was a metal tapered washer between the frame and the bushings.. do i need to get new ones if it was a washer or will the bushing be fine sitting on the frame....thanks josh
Logged
*

jplowman2005

Re: Samurai body mount bushing help
« Reply #1 on: February 10, 2008, 07:55:32 AM »
bump..
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Samurai body mount bushing help
« Reply #2 on: February 10, 2008, 12:10:05 PM »
I think that it is there to keep the bushing from getting cut by the frame, I would get some new ones.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

jplowman2005

Re: Samurai body mount bushing help
« Reply #3 on: February 10, 2008, 04:49:33 PM »
anyone know a website that i could order them from?
Logged
*

jplowman2005

Re: Samurai body mount bushing help
« Reply #4 on: February 11, 2008, 12:46:02 PM »
if anyone has any ideals where i can get these please let me know..i went up to my local suzuki dealership and looked at the parts book and it didnt show a washer so now im stuck;-(
Logged
Pages: [1]   Go Up
« previous next »