some kind of strut brace?

Hello,

I take a guess...Is it a carrier bearing support???

Later Tom K.

Not real sure what that even is.  Kind of a solid axle guy that doesn't ask questions.

Not real sure what that even is.  Kind of a solid axle guy that doesn't ask questions.

I think he said he was using stock sidekick knuckles...

The more I look at it the smaller I think it is than it looks - I'm thinking a steering brace for the idler arm, or steering box ......

Quote from: feerocknok on March 01, 2006, 10:03:29 PM

Not real sure what that even is.  Kind of a solid axle guy that doesn't ask questions.

I think he said he was using stock sidekick knuckles...

The more I look at it the smaller I think it is than it looks - I'm thinking a steering brace for the idler arm, or steering box ......

I think he's right. I looked at the thing real hard for about the past hour. I havent been following the article. (been off the forum a while). Using a OEM knuckes... the mounting plate has about the right spacing...  That is the best idea that I can come up with myself since it is "front suspension related. On a custom rig, this is a hard guess. The only thing that I can think of that a person would want bolt on is differential mounts and the mounting points for suspension components. All mounts would be welded, not bolt on. That one suspension peice is all I can consider.

...but who knows... the front end of the rig doesn't appear to be the only thing he has that's bent.

I don't know if it's been said, but is it a front diff mount?

Finally the first SPY cam photo of the Orange Rig and it's make over 

OK , it's only a part off of it. BUT:

If you are the first Zukiworld member to properly identify this part, wewill send you a free Zukiworld decal  So let's see who knows their stuff.

Zig

Lower control arm for use with a spherical ball mount large hole, 2 holes are to locate the spring?

Yea ha, I have it

It is a front suspension component fabricated from mild steel

So where is my Patch C'mon guys

ZeusZuki

front bearing support........ for the weak side front axle

Guys,

If you want your guess to count, go to the other post!

Thanks, Eric

ok I know this is a far one but can you do a suspension or adapt the design from the H1 to give clearance and keep the drive shafts in line i do not know of another vehicle that uses this but or a 2 piece shaft to break up the extreme angles...does this make sense.....

Yep, i thought about that for the CVs, but there
just isn't room under the trucklet for all that extra stuff

INSIDE  INFO,    THE ORANGE RIG IS GETTING IT'S FIRST BEATING SUNDAY  3-19-06   THATS ALL I KNOW ............ BUT IT LEFT THE SHOP IN 1 PIECE.  SEE HOW IT RETURNS ,,,....IF IT DOES!!   STAN

Wheres the pics???

INSIDE  INFO,    THE ORANGE RIG IS GETTING IT'S FIRST BEATING SUNDAY  3-19-06   THATS ALL I KNOW ............ BUT IT LEFT THE SHOP IN 1 PIECE.  SEE HOW IT RETURNS ,,,....IF IT DOES!!   STAN

We want PICS!!!!!!PLEASE