Hello Guest
« previous next »
Pages: [1]   Go Down

Licence plate lights

  • 2 Replies
  • 964 Views

0 Members and 1 Guest are viewing this topic.

*

Offline SunrunnerGT

  • 163
  • 0
  • Gender: Male
  • 1994 Pontiac Sunrunner GT and 1996 X90
    • Aaron's Suzuki
Licence plate lights
« on: January 12, 2008, 08:30:39 PM »
How do i replace these light bulbs?? I cant get the plastic dome cover off that covers the bulbs.
Logged
Sunrunner GT, Gold Trim Level
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Licence plate lights
« Reply #1 on: January 12, 2008, 09:39:34 PM »
on my samurai there is two screws that hold each cover on the plastic lens.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: Licence plate lights
« Reply #2 on: January 13, 2008, 01:21:56 PM »
Patience, grasshopper...

If you cannot fit a philips screwdriver onto the two screws that hold each lens in place then remove the housing, you may be forced to remove the entire assembly. Do this by removing the inside trim on your tailgate then removing the two nuts that hold it in place with a 10mm socket.  That's how I did it, then again, I was modding the assembly it to fit on the tailgate of my Samurai...
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
Pages: [1]   Go Up
« previous next »