Hello Guest

Hey james (proud2Bcdn)

  • 5 Replies
  • 1696 Views

0 Members and 2 Guests are viewing this topic.

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Hey james (proud2Bcdn)
« on: January 19, 2005, 03:36:18 PM »
hows the engine doing? is there a noticible difference?

havent heard anythign about it  just wondeirng how ya liek it

my lug nuts require more torque then my engine makes ;)

*

Proud2BCDN

Re: Hey james (proud2Bcdn)
« Reply #1 on: January 19, 2005, 04:03:22 PM »
Jury is still out on that one...haven't been able to beat on it at the top end yet. As for in town it has a quite a bit more jump than it had, it really likes to rev now. It sure takes off like a scared rabbit from the line ;). I'm getting slightly better mileage as well. If the roads ever dry up here then I'd like to give it a real top end blast (bounce it off the rev limiter through 3 gears...4 if it'll take it ;))....I will say that it pulls a bit harder at 120km/h when there's no head wind :) It makes the most wonderful sounds as well, a very throaty growl when I stomp on it...nice low lumpy idle :)

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Hey james (proud2Bcdn)
« Reply #2 on: January 19, 2005, 04:14:26 PM »
Quote
Jury is still out on that one...haven't been able to beat on it at the top end yet. As for in town it has a quite a bit more jump than it had, it really likes to rev now. It sure takes off like a scared rabbit from the line ;). I'm getting slightly better mileage as well. If the roads ever dry up here then I'd like to give it a real top end blast (bounce it off the rev limiter through 3 gears...4 if it'll take it ;))....I will say that it pulls a bit harder at 120km/h when there's no head wind :) It makes the most wonderful sounds as well, a very throaty growl when I stomp on it...nice low lumpy idle :)


oh nice, what mods did you do to it, i cant get mine up to 120kmh lol well i can but i have to be goin down a bit of a hill, i can do about 110 nicely on straight pvmnt.

my lug nuts require more torque then my engine makes ;)

*

Proud2BCDN

Re: Hey james (proud2Bcdn)
« Reply #3 on: January 20, 2005, 12:26:10 AM »
Quote


oh nice, what mods did you do to it, i cant get mine up to 120kmh lol well i can but i have to be goin down a bit of a hill, i can do about 110 nicely on straight pvmnt.


Here's what I have done to it:
.020 over pistons
Head milled .010, intakes and exhausts ported
Calmini cam, header, muffler, cat and 2" exhaust
Throttle body spacer
Ricer short ram intake with cone filter ;)

I'm thinking about cutting out the cat and possibly getting an underdrive pulley...an electric fan couldn't hurt either. Was also wanting to get 5.83 gears but I'd need a 12bolt rear end first  :-/
« Last Edit: January 20, 2005, 12:27:48 AM by Proud2BCDN »

*

Proud2BCDN

Re: Hey james (proud2Bcdn)
« Reply #4 on: January 24, 2005, 11:37:24 AM »
Well the highway was dry and the weather was warm so the throttle was pushed through the floorboard today when I merged onto the highway....actually had to let off cuz I was closing fast on the Civic that was merging ahead of me...uphill, 3rd gear, 60mph lotso pedal left ;D

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Hey james (proud2Bcdn)
« Reply #5 on: January 24, 2005, 04:52:34 PM »
Quote
Well the highway was dry and the weather was warm so the throttle was pushed through the floorboard today when I merged onto the highway....actually had to let off cuz I was closing fast on the Civic that was merging ahead of me...uphill, 3rd gear, 60mph lotso pedal left ;D


oh nice! wish mine owuld do that :D

my lug nuts require more torque then my engine makes ;)