Hello Guest
« previous next »
Pages: [1]   Go Down

sidekick pinout sheet? anybody have one??

  • 8 Replies
  • 2124 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Jluck

  • 1389
  • 40
  • Gender: Male
sidekick pinout sheet? anybody have one??
« on: January 12, 2011, 10:16:32 AM »
I'm looking for a pin out sheet for ecm (or whatever 'ya prefer to call the engine management computer) Im working with a 92 jx 16v 4door kick and need the pin sheet for the comp. thanks
Logged
life is 10% what happens to you and 90% what you do about it!
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: sidekick pinout sheet? anybody have one??
« Reply #1 on: January 12, 2011, 12:20:16 PM »
I have a 93 FSM (at home), and it does not have a direct pin out.  I went through the electrical pages to get what I needed, as it is organized by controls ie charging, lights, brakes etc. 
You should only be needing a few of the pins for power, memory power, rpm, oil pressue (light), temp guage, starter signal, ignition, GROUND.  Off top of my head, I will check my wiring lists as to where I routed those to off the new ECM, this evening.
If you need a VSS signal for the ECM, you can get an adapter from the speedo cable to VSS, but the OBD I  VSS signal from some speedo's are not compatible with OBD II VSS signals (which is probably what your Audi is).
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: sidekick pinout sheet? anybody have one??
« Reply #2 on: January 12, 2011, 02:25:57 PM »
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: sidekick pinout sheet? anybody have one??
« Reply #3 on: January 12, 2011, 02:54:59 PM »
Rhinoman to the rescue! ;D
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Jluck

  • 1389
  • 40
  • Gender: Male
Re: sidekick pinout sheet? anybody have one??
« Reply #4 on: January 12, 2011, 03:15:10 PM »
thank you Rhinoman!!!  TP up!
Logged
life is 10% what happens to you and 90% what you do about it!
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: sidekick pinout sheet? anybody have one??
« Reply #5 on: January 12, 2011, 04:46:33 PM »
That is much easier than the way I did it.
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: sidekick pinout sheet? anybody have one??
« Reply #6 on: January 12, 2011, 06:16:33 PM »
Too late to mention this I guess, but here is a detailed TracKick wiring document by Warbird created for building a Samurai 1.6 wiring harness:

http://www.acksfaq.com/16wiringharness.htm

It has lots of detailed info about all the electrical plugs - including the ECM!

I hope that this helps!
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
*

Offline Jluck

  • 1389
  • 40
  • Gender: Male
Re: sidekick pinout sheet? anybody have one??
« Reply #7 on: January 13, 2011, 11:24:07 PM »
wow thanks ack! lots of great info.
Logged
life is 10% what happens to you and 90% what you do about it!
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: sidekick pinout sheet? anybody have one??
« Reply #8 on: January 14, 2011, 07:49:22 AM »
Quote from: ack on January 12, 2011, 06:16:33 PM
Too late to mention this I guess, but here is a detailed TracKick wiring document by Warbird created for building a Samurai 1.6 wiring harness:

http://www.acksfaq.com/16wiringharness.htm

It has lots of detailed info about all the electrical plugs - including the ECM!

I hope that this helps!

VERY GOOD information.  I have bookmarked it for next time.  Thanks for all the information you have gathered and shared.

Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
Pages: [1]   Go Up
« previous next »