Hello Guest
« previous next »
Pages: [1] 2 3 ... 6   Go Down

New Front Coils

  • 78 Replies
  • 15486 Views

0 Members and 43 Guests are viewing this topic.

*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
New Front Coils
« on: August 28, 2008, 05:35:30 PM »
 Ups guy came buy today and brought me these. I think that they will work out good. They are 16" 3"ID and 550ppi. The Calmini springs are 14 3/4" long and I ran a 1 .1/8" spacer on top of that. I have been running OME springs and alot of spacer and I like the ride and they are 540ppi so I thought 550ppi would workout fine.


   Kevin
« Last Edit: August 29, 2008, 09:20:16 AM by ppltrak »
Logged
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: New Front Coils
« Reply #1 on: August 29, 2008, 11:34:07 AM »
Where did you pick up the coils from?
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline RJkick

  • 631
  • 4
  • Gender: Male
Re: New Front Coils
« Reply #2 on: August 29, 2008, 11:55:50 AM »
Where and roughly what did they run?

Are you thinking about the rear springs as well?
Logged
92 Sidekick 1.6L 16v Calmini\OME 4.5" lift 3" Body Lift OME962 springs in front w\.75" spacers OME955 in rear w\1.75" spacers Extreme Duty Strut Eliminator kit and rear ProComp MX6 Shocks 31X10.50 Nexen M\T   Thorley Header   2" exhaust  Calmini front truss bar and stabilizer and skids   Custom Bumpers and Rock Rails  Limit Straps
*

Offline MUD CHILD

  • 355
  • 9
Re: New Front Coils
« Reply #3 on: August 29, 2008, 12:04:44 PM »
Those look wicked!!! I'm going to order a set of them for myself as well
« Last Edit: August 29, 2008, 12:13:54 PM by MUD CHILD »
Logged
NO DITCH TO DEEP NO HILL TO STEEP

http://srcustoms.ca/
*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
Re: New Front Coils
« Reply #4 on: August 29, 2008, 12:11:00 PM »
I'll hopfully get them in this weekend and let you know how they work before any ordering of more coils :)

   Kevin
Logged
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's
*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
Re: New Front Coils
« Reply #5 on: August 29, 2008, 03:13:36 PM »
Mud child order them at 14" because I need to cut them down. I just spent an hour w/ spring compressers and couldn't fit them. I'll cut them down to 15" and try on tues. I'll keep U posted.

    Kevin
Logged
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's
*

Offline MUD CHILD

  • 355
  • 9
Re: New Front Coils
« Reply #6 on: August 29, 2008, 08:25:11 PM »
Quote from: ppltrak on August 29, 2008, 03:13:36 PM
Mud child order them at 14" because I need to cut them down. I just spent an hour w/ spring compressers and couldn't fit them. I'll cut them down to 15" and try on tues. I'll keep U posted.

    Kevin

Thanks for the heads up! Try taking the bottom ball joint off at the control arm and then put the spring in and use a floor jack under the control arm and jack it up till you can get the ball joint bolted up. If it to tight also use a spring compressor on the spring at the same time.
Logged
NO DITCH TO DEEP NO HILL TO STEEP

http://srcustoms.ca/
*

Offline Shredder

  • 389
  • 1
  • Gender: Male
  • She thinks my Tracker's sexy
    • Me & My Rig
Re: New Front Coils
« Reply #7 on: August 30, 2008, 09:51:56 AM »
If you cut them down the spring rate will increase.
Logged
'96 Astro Van 2wd, +10 Overland, 32s, Tow Rig
'96 Tracker LWB 4x4, +4.5 Calmini/Boondox, +3 Boondox BL, 31x10.50 (wife rolled)
'93 Sidekick LWB 2x4, 235s, +3 Boondox Suspension kit, 4wd swap 2b
'91 Tracker SWB, Toy axles, YJ Springs, Boondox Swap Kit, 31x10.50
*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
Re: New Front Coils
« Reply #8 on: August 30, 2008, 12:02:27 PM »
I'll just cut the closed end and 1/2 of a coil. they should still be OK in the ppi rate.

   Kevin
Logged
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's
*

Offline rockrat

  • 196
  • 0
  • Gender: Male
  • Got Ringr
Re: New Front Coils
« Reply #9 on: August 31, 2008, 07:31:05 AM »
What brand of spring are they and where did you order them form??
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: New Front Coils
« Reply #10 on: August 31, 2008, 05:03:55 PM »
Yes Please share! Many of us are looking for a different source for front coils!
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline biker

  • 730
  • 7
  • Gender: Male
  • It's a sickness I tell ya
Re: New Front Coils
« Reply #11 on: August 31, 2008, 05:58:48 PM »
http://www.ballisticfabrication.com/ These guys carry 3"ID coils for a decent price
Logged
94 Kick with bigger tires
99 Vitara 2wd
10 Gr Vitara
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: New Front Coils
« Reply #12 on: September 01, 2008, 05:28:29 AM »
 :) Great Link, Thanks Biker! BTW, I ride too, 88 FLHS.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Z71Edge

  • 87
  • 0
Re: New Front Coils
« Reply #13 on: September 03, 2008, 08:29:10 AM »
So if the Calmini 3" front springs are 14 3/4" tall...if you order 14" springs, with the factory 450 ppi rate, you should essentially gain 2-2 1/2" of lift right? For $75 a spring, that isn't a bad price if this will work...
Logged
93 Tracker, 1.6L 5spd, 235's on stockers for now...
*

Offline MUD CHILD

  • 355
  • 9
Re: New Front Coils
« Reply #14 on: September 03, 2008, 09:21:36 AM »
Did you get the springs in? how does it ride? The wire diameter of the new spring looks quite a bit thicker that the calmini spring.
Logged
NO DITCH TO DEEP NO HILL TO STEEP

http://srcustoms.ca/
Pages: [1] 2 3 ... 6   Go Up
« previous next »