Hello Guest

misfiring and power loss please help

  • 1 Replies
  • 810 Views

0 Members and 1 Guest are viewing this topic.

*

Offline thorlof

  • 7
  • 0
  • I Love ZUKIWORLD!
misfiring and power loss please help
« on: December 27, 2006, 08:30:43 PM »
ok here is the set up

87 zuk 1600cc with 1300head a class 1 cam  and then a Weber
every thing else is stock

its cold about 35 degrees fahrenheit out
the zuk starts up and runs fine

4to5 miles into the drive and the motor is all warmed up
and it starts to misfiring and then starts backfiring at around 4000 rpm

some times if i stop the car shut it off and re start a few seconds later it runs fine

or i can knock on the side of the distributor housing and it clears up

im thinking the electronics in the distribute are going out???
any suggestions or thoughts...

help cuz it getting worse i think
« Last Edit: December 30, 2006, 07:48:01 AM by thorlof »

*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: misfiring and power loss
« Reply #1 on: December 27, 2006, 10:08:24 PM »
I would check for a broken wire inside, a loose ground, and also clean the plug to the dist, and look for traces.
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.