Hello Guest
« previous next »
Pages: [1]   Go Down

Larger Master Cylinder that fits TRACKERS

  • 13 Replies
  • 2493 Views

0 Members and 4 Guests are viewing this topic.

*

Offline dustybadlands

  • 169
  • 0
  • Gender: Male
    • dustybadlands treeslammer
Larger Master Cylinder that fits TRACKERS
« on: January 30, 2009, 05:51:51 PM »
Better brakes are always a good thing and with the 33X12.50's and all the extra armor, in my case they're a necessity. I'm puttin' together the parts for a rear disc brake conversion, goin with Nissan 300 ZX calipers but which master cylinder to use eludes me. Ack's facts had a link that suggested that Subaru Imprezza's bolt right on Sammies. Will they bolt on similarly to a 93 Tracker? What about Mazda 929's MC?
Logged
"If nuthin' changes, nuthin changes. Do what ya  always did, get what ya  always got !"
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Larger Master Cylinder that fits TRACKERS
« Reply #1 on: January 31, 2009, 06:07:53 AM »
Have a look round a junkyard. A lot of Jap cars have Nissin brakes, you will want a disc/disc master cylinder.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Larger Master Cylinder that fits TRACKERS
« Reply #2 on: January 31, 2009, 11:18:54 AM »
Maybe a Trackick 4 door master cylinder? I know their a bit more powerful, and slightly bigger bore. Got one waiting to go in mine soon.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline dustybadlands

  • 169
  • 0
  • Gender: Male
    • dustybadlands treeslammer
Re: Larger Master Cylinder that fits TRACKERS
« Reply #3 on: January 31, 2009, 10:53:49 PM »
the post I read said the subaru MC was a direct bolt on to a Sammy, does that mean it'll do the same to a Tracker? It had a 1 1/16" bore.

http://www.zukikrawlers.com/showthread.php?p=295080#post295080

page down
Logged
"If nuthin' changes, nuthin changes. Do what ya  always did, get what ya  always got !"
*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: Larger Master Cylinder that fits TRACKERS
« Reply #4 on: February 01, 2009, 02:41:14 AM »
I'm currently fitting one to a SJ410 and it has a different bolt pattern to the one I pulled out but the Kick may be the same as the Subaru.
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Larger Master Cylinder that fits TRACKERS
« Reply #5 on: February 01, 2009, 12:43:27 PM »
This doesn't look right for a Kick. I thought the Nissin m/c had the mounting holes at an angle (I have Lucas brakes!)
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline RACER X

  • 383
  • 0
  • Gender: Male
  • zuki or die!
Re: Larger Master Cylinder that fits TRACKERS
« Reply #6 on: February 01, 2009, 01:03:15 PM »
Jap cars ???? Racist
Logged
98 kick
*

Offline locjaw

  • *
  • 2045
  • 22
  • Gender: Male
Re: Larger Master Cylinder that fits TRACKERS
« Reply #7 on: February 01, 2009, 05:27:53 PM »
jap wouldnt be racist, just real lazy :P
Logged
1995 Sidekick SAS'd "Trail Slayer"
1993 4 door lifted "Road Warrior"
1995 4 door stocker "CreamPuff"
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: Larger Master Cylinder that fits TRACKERS
« Reply #8 on: February 01, 2009, 11:36:39 PM »
Quote from: locjaw on February 01, 2009, 05:27:53 PM
jap wouldnt be racist, just real lazy :P

x2

Depends on the context. An internet forum (where people are lovers of Japanese vehicles, I would think "Jap" is just short-hand for "Japanese". "Jap" is only used as a derigitory terms by people who were old enough to remember WWII.
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Larger Master Cylinder that fits TRACKERS
« Reply #9 on: February 02, 2009, 02:59:01 PM »
Quote from: RACER X on February 01, 2009, 01:03:15 PM
Jap cars ???? Racist

Well I consider myself a Brit, is that a racist term?
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Larger Master Cylinder that fits TRACKERS
« Reply #10 on: February 02, 2009, 03:01:16 PM »
 ;) :) I doubt it ya tea swillin' limey! But seriously Rhinoman, LUCAS ( Prince of darkness ) Lights? Your kidding right?
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Larger Master Cylinder that fits TRACKERS
« Reply #11 on: February 03, 2009, 02:09:14 PM »
Quote from: bentparts on February 02, 2009, 03:01:16 PM
;) :) I doubt it ya tea swillin' limey! But seriously Rhinoman, LUCAS ( Prince of darkness ) Lights? Your kidding right?

The brakes are Lucas Girling. I'm not sure about the headlights, possibly not they're 12V  ;D. I'm looking to fit the Nissin servo from a SWB to mine so I can use the LWB master cylinder. I have the LWB brakes front and back and I now get too much pedal travel, I know that the LWB servo is far to big. Thats why I queried the bolt pattern. I have the servo but haven't taken it out of the box yet, its snowing here and I don't have a garage that the Zuk fits in.
Hmm, time for a cuppa.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline dustybadlands

  • 169
  • 0
  • Gender: Male
    • dustybadlands treeslammer
Re: Larger Master Cylinder that fits TRACKERS
« Reply #12 on: February 03, 2009, 08:29:08 PM »
A'ight bruthas, lemme phrase dis diffenly. Would say, aTracka's (rhymes wit "cracka") massa cylinda fit on a say, Sammy? O habout a Sammy's on a Tracka?          Cracka!
Logged
"If nuthin' changes, nuthin changes. Do what ya  always did, get what ya  always got !"
*

Offline dustybadlands

  • 169
  • 0
  • Gender: Male
    • dustybadlands treeslammer
Re: Larger Master Cylinder that fits TRACKERS
« Reply #13 on: February 05, 2009, 09:04:14 PM »
Now I guess that's racist. Sorry, let me translate: Will Tracker and Sammy MC's interchange?
Logged
"If nuthin' changes, nuthin changes. Do what ya  always did, get what ya  always got !"
Pages: [1]   Go Up
« previous next »