I've seen so many awesome Zuks in this thread that I just had to put up a couple pics of mine. It's a 91 Tracker
9/34-16 TSL's
4" susp lift
3" body lift
IFS widening with 3" diff drop brackets
welded rear with XJ coils
homebuilt bumpers, sliders and skid plate
fender trimming front and rear
6000lb winch
homebuilt rollbar
rebuilt motor with high torque cam
low restriction air filter
2" exhaust with no cat and low restriction resonator( has a nice rap to it)
converted to 3spd auto tranny
4.24:1 t-case gears
homebuilt steering brace
converted to 4 door brakes all around
converted to elec cooling fan
CB radio
GPS navigation
and I'm sure there are things I'm forgetting but I haven't had enough coffee yet this morning

that is a nice kick, do you have any closer up pics of the suspention and the diff drop brakets, i want mine to be just like yours

Hello,

I would like to introduce my self here.
I`m Ronald From Holland, i drive a vitara ( think it`s call Sidekick here).

The reading of the language is not a problem of mine, but the writing is sh*t.

I bought my suk all stock.
So my specs list is not that long yet, but my to do list is longer.

specs:

-vitara 1.6I Metall top JLX

-colour: Black

-3 drs

- Powersteering, elecktrical windows, Centrall lock

My specs:

- body lift 8cm ( think that is 3 " )

- CB dash. instal.

- BF goodrich 32-11,5-15

- 10j rims colour black ( on the picture there not on the car jet)


Sorry for the bad picture but i`have no better one yet.

that is a nice kick, do you have any closer up pics of the suspention and the diff drop brakets, i want mine to be just like yours

Sorry I don't have any closeup pics, front is 2"calmini control arms with stock springs and a 2" spacer. Brackets are from a 3" calmini lift kit. Rear is Heep XJ front coils

biker: Can you buy just the front 3" calmini drop braket?

Guess I should introduce myself too. Eric from Greenville, SC - USA. 1987 Samurai JX with the following mods:
Powertrax locker in rear
SPOA with z-link and geo metro breaklines
33x10.50 BFG M/T on 15x8 steel rims
5.14 t-case gears
DIY Forrest t-case bucket with stock diy beefed up mounting arms
DIY diff protection using a 8" weld on pipe cap cut in half
DYI RRO front and rear bumpers
Carolina Driveline extended rear drive shaft
Custom roll cage by Twisted Fabrication

1988 Suzuki Samurai
Stock 1.3L w/ snorkle running on propane
Full Custom Roll-Cage
Welded Rear
Rear 3rd member up front w/ calmini 26 spline axle shafts
RockCrawler Rim w/ 28" Thornturds
Rocky-Road SPOA 6" lift

On order:
Calmini 5.14:1 Transfercase Gears
32" TSL SuperSwampers
Custom Traction Bar


Sorry about the big pic!

My current ongoing project :
1986 Samurai , 1.6 tracker engine
2" exhaust
a bit of this and a little of that
many more ingredients to follow .

Jeff Stoess
Crestwood, Kentucky
1987 Samurai LWB (no rust  )

Motor:   
Volkswagen 1.9 Turbo Diesel
GM alternator
2.5" straight exhaust
Home made snorkel

Interior:
Acura integra seats
CB
GPS

Driveline:
Stock
 
Suspension:   
SPOA
Shackle reversal
Extended Brake Line Kit


Tires/Wheels
31x10.50-15 BFG KO's
Tracker wheels (I think)   

Front and rear Bumper:
Front stock with OEM push bar
RRO Crawler II

Mods to come:
Rock rails, ShrockWorks front bumer
Warn 8000
33x10.5 TSL radials or 34x9.50 Swampers
Rino line interior
ARB front and rear lockers
Exterior roll cage
Roof rack

Stock



As is now





Out of the 7 Samurai's I've owned and built, this is by far the best mod

that thing is awesome

that thing is awesome

Thanks! 

well here are pics of my new sidekick and one of my tracker. i gotta say i love driving the sidekick.

lol forgot to put more pic of the sidekick up. here you go

well here are pics of my new sidekick and one of my tracker. i gotta say i love driving the sidekick.

The tracker looks like someone stole the wheels. 

THIS IS MY 91 TRACKER AND MY INTRO TO OFF-ROAD.MODS ARE CALMINI 6" COMBO LIFT,FULL
SKID PLATES,ROCKER SKIDS,6 POINT CAGE AND FULL EXHAUST.TIRES ARE 34-10.50-15 SUPER SWAMPER TSL.WHEELS ARE EXTREME ROCK CRAWLER 15X8.Now with toy cv's,5.62 gears,rear mini spool and front 3 pin carrier and lock rights.