okay the truck sits on its wheels.I've got the axles installed and it's a roller for now. I only have to run the new fuel lines and brake lines and measures for the drive shafts and put it on the forklift and measure for the shocks. I have taken some pictures of the suspension to show you my installation. I have made several posts of this project over the last two years. If you haven't read them. You might want to. Just do a search of zuktoy.this is bad on ongoing project, and it's finally all most done. In some of my last posts, someone said I would have problems with the steering. If you look at the pictures. You will see how I solved the problem instead of a one-piece steering system I've use, a two-piece, so the steering rod, mimics the upper track bar.here are the pics
