I have a 88 samurai and i am going to be installing a locker in the front and a spool in the rear i was wandering if there is anything else that i should need while i am installing the spool and locker. Will i need to get new seals or wheel bearings?

Any input is appreciated.

gday i would cheak the bearings and seals you wouldnt want have to pull it apart again
i replaced all mine when i put lockers in

I would plan on replacing the seals at least.  Nothing is more annoying then tearing it all apart, then tearing it all apart again.

For the 3rd members I normally just use some RTV auto gasket maker stuff.  Other then that just read up on the installation and go for it.