Hello Guest

hey digger..

  • 39 Replies
  • 5856 Views

0 Members and 4 Guests are viewing this topic.

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #15 on: March 30, 2007, 07:01:52 AM »
I will get pictures of it tonight. 

The "mount" is was talking about was where the rear seat is bolted to the floor. 

I drive the tracker everyday to school and back no problems.  Some weekends I put about a hundred miles on it.  It runs really good. So doubt you would have any problems driving it home. 

I am pretty sure it is inspected till November, but i will double check. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #16 on: March 31, 2007, 10:27:49 PM »
???
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #17 on: April 01, 2007, 11:53:55 AM »
your not gonna dick me over and not sell to me are you? cause that had happened to me before
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #18 on: April 02, 2007, 08:41:52 AM »
No i am not gonna dick anybody over.  On the weekends I only have a dial-up connection.  So uploading pictures is not easy.  I was busy working on my sidekick Saturday and Sunday it rained so i could not get pictures.  I will take pictures of the spots u wanted tonight and get them uploaded tomorrow before noon. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #19 on: April 02, 2007, 11:29:53 AM »
ok thanks alot man.  i appreciate the time your takin to give me the info bout the tracker.  ya know i just dont wanna drive out an hour and a half to find somethin i dont want.  but thanks alot man!  :)
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #20 on: April 03, 2007, 08:29:02 AM »
Here is some more pictures:

Cross member


Seat Bracket that is loose


Rocker


Rocker 2


It is inspected till November.

If you need anything else let me know. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #21 on: April 03, 2007, 01:26:37 PM »
besides the 4 rust spots and holes you have showed me, are there any other places on the tracker that is rusted out or has a hole? ...if so please snap a pic of it if you can.  sorry to trouble you with the pics but i just wanna see what i would be buying. thanks
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #22 on: April 04, 2007, 07:39:34 AM »
That is all the rust spots that I know of.  I have never taken anything off of this tracker so I don't know a lot about it.  But as far as i can tell that is all of the rust. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #23 on: April 04, 2007, 05:31:38 PM »
i cant really tell from that pic of the rear cross member, but is the rust all the way through the metal?  also are there any tears in the interior on the carpet? and does it have power steering? (mine doesnt so its no big deal)
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #24 on: April 05, 2007, 09:38:03 AM »
No tears in the carpet or seats.  Yes it has power steering.  The middle portion of the cross member is rusted through (AKA not there anymore).
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #25 on: April 05, 2007, 03:08:22 PM »
hey man i was going through all of my financial information and ive come up with in order for me to be on time with rent and being able to pay my bills i would only be able to spend like 600 on your tracker.  Its totally up to you if you would that amount for it but i hope you realized how bad ive wanted it. I still do but if you wouldnt take that amount then i wouldnt be able to buy it. Im really sorry to tell you this now but i just realized it.  600 bucks would guarantee me to buy it but its all up to you.  All i really want you to do is put that timing belt on there and its basically sold...but again thats all up to you 
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #26 on: April 06, 2007, 06:43:40 AM »
Well, I need $700.  I bought it for $800 and put about $250 in parts new parts in it.  I have only put 3,000 miles on it.  It is in too good of shape to sell for less than $700.  If I get the time and fix the valve I can sell this thing for about $1200.  Not sure you will find a good running tracker for less than $800.  If you can come up with an extra $100 its yours and you can come get it when you want.  If not let me know so I can list it up to everyone.  Thanks
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #27 on: April 06, 2007, 08:55:32 AM »
alright man well ill get that extra 100 somehow.  I should hopefully have the money in a lil over 2 weeks. so 700 it is.  Will you still have the new timing belt on?  if yes i would want you to show me the old one so i know you did it.  Sorry man ive been ripped off way too much...not sayin that you'd do it but i just wanna make sure.  But ya in bout a lil over 2 weeks it should be sold. And how would we go about the title transfer since you live so far away?  Im still on my moms insurance and it would be put in her name but i was talkin to her and she was hopin there was a way to do it without me dragging her out over 100 miles.  Is there a way where she wouldnt have to come to get the tracker with me?
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: hey digger..
« Reply #28 on: April 06, 2007, 03:08:06 PM »
MuseBoy,

Was that you that was trying to sell a grill that you got.  Was it a tracker or sidekick Grill?  If it was a sidekick grill and you still have it we could take $50 off the price. 

Not sure about the title thing.  I know there is a place real close to my house to do.  You could put it in your name here than transfer it to your mom and say that only bought it for like $100 to avoid paying the taxes again.  If I get a chance i will call around and see if the notary can work something out. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: hey digger..
« Reply #29 on: April 06, 2007, 07:33:39 PM »
ya that was me who was sellin the grill.  its brand new and i think it fits an 89-95 tracker and sidekick...its black and ill give it to you for 50 bucks off.
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD