Hello Guest
« previous next »
Pages: [1]   Go Down

Flushing axles

  • 2 Replies
  • 1012 Views

0 Members and 1 Guest are viewing this topic.

*

J-Ron

Flushing axles
« on: October 16, 2007, 04:29:29 PM »
so i got my toyota axle and drained out what resembles digested mexican food... so i filled it with diesel, like the guy at the AC Delco said, and drained it... twice. the stuff still looks like it came out of the sewer and i was wondering if i should just go ahead and fill it with the oil or flush it some more. do i need to flush it with anything else or is the remaining diesel not going to be a problem with the oil im going to put in?

 and what's the stock axle gearing on samurai axles?
Logged
*

Offline locjaw

  • *
  • 2045
  • 22
  • Gender: Male
Re: Flushing axles
« Reply #1 on: October 16, 2007, 06:12:16 PM »
stock sammy axle gears are 3.73 to 1
Logged
1995 Sidekick SAS'd "Trail Slayer"
1993 4 door lifted "Road Warrior"
1995 4 door stocker "CreamPuff"
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Flushing axles
« Reply #2 on: October 16, 2007, 10:46:31 PM »
take it to the quarter car wash and give it a good one then dry it well. the one we have here has the engine degreaser its green and nasty, would clean any burrito.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
Pages: [1]   Go Up
« previous next »