OK AFTER 12 HOURS OF WORKING ON THE KICK THE SUSPENSION LIFT IS IN & BODY LIFT ALLMOST DONE
UNFORTUNATELY BRIAN & I BOTH HAVE SOMETHING GOING ON TOMORROW
BUT MAYBE WILL FINISH UP ON TUESDAY ÂÂ
OK THE FRONT WAS AS FUN AS YA'LL SAID IT WOULD BE BUT WE GOT IT IN THERE..ONE QUESTION ÂÂ
THE SWAY BAR ENDS LOOK AS IF THEY NEED TO BE REMOVED AND PUT ON OTHER SIDE TO LINE UP BETTER WITH A ARMS..THE ENDS ARE MOUNTED ON OUTSIDE, LOOKS LIKE WE NEED TO MOVE THEM TO THE INSIDE FOR BETTER ALIGNMENT WITH MOUNTING HOLE  WE THOUGHT THAT ONCE THAT WAS IN THE BACK WOULD BE A CINCH :-/   BUT TO  GET THE BOLTS OUT OF THE OLD ARMS IN REAR WE NEEDED TO USE A SMOKE WRENCH & SAWS ALL ÂÂ
THE RUBBER BUSHING JUST WANTED TO TURN WITH THE BOLT & WE COULDN'T GET AIR CHISEL IN THERE TO KNOCK IT OUT
SO WE BROKE OUT THE ALLMIGHTY TOOLS ÂÂ
AND THEN ON THE PLATE THAT BOLTS ON TO THE TOP OF REAR PUMPKIN HAD A BOLT SNAP AT FIRST TURN OF THE WRENCH
BUT EVEN WITH ALL THAT WE GOT IT DONE....
THE BODY LIFT WENT PRETTY WELL WITH THE EXCEPTION OF A FEW BOLTS WANTING TO BREAK ON THE BUMPERS ÂÂ
NOW WE JUST HAVE TO CRANK DOWN ALL THE BODY LIFT HARDWARE, FIGURE OUT THE BUMPERS ,CONNECT SWAY BAR & ALIGN....AND STAGE ONE WILL BE DONE
THEN WE'LL PUT IN THE SUPERWINCH MANUAL HUBS ..SPOOL AND ALTERNATOR UPGRADE WILL HAVE TO WAIT ÂÂ
  THANKS HAPPY ZUKING MATTY D.  OH YEA I BOUGHT A THROUGH AWAY CAMERA FOR PICTURE TAKING WITH GREASY HANDS SO AS SOON AS I FINISH ROLL I'LL HAVE SOME PICTURES POSTED TO MY SIGHTS ÂÂ