Hello Guest
« previous next »
Pages: [1]   Go Down

Front axle removal -- could use a quick tip

  • 4 Replies
  • 1425 Views

0 Members and 5 Guests are viewing this topic.

*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Front axle removal -- could use a quick tip
« on: March 15, 2006, 07:20:19 PM »
having a time getting the pass side flange off the hub assembly.  The thing held on by 6 bolts.  How's it done, folks?  Bolts are removed, but they really seem to have stuck it on there at the factory.

'03 tracker

really want to get the front diff dropped by bedtime..
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Front axle removal -- could use a quick tip
« Reply #1 on: March 15, 2006, 09:06:23 PM »
We need a pic, an 03 is new and I don't
know what equipment you got on it
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: Front axle removal -- could use a quick tip
« Reply #2 on: March 16, 2006, 06:56:12 AM »
Quote from: wildgoody on March 15, 2006, 09:06:23 PM
We need a pic, an 03 is new and I don't
know what equipment you got on it

Gosh, that certainly would've been a good idea.  Been snapping pics left and right, and it never occured to me to take one of this!  D'oh!

I got it, though.  Instead of a BFH, it required an RTS.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Re: Front axle removal -- could use a quick tip
« Reply #3 on: March 16, 2006, 11:14:01 AM »
Quote from: beercheck on March 16, 2006, 06:56:12 AM
Quote from: wildgoody on March 15, 2006, 09:06:23 PM
We need a pic, an 03 is new and I don't
know what equipment you got on it

Gosh, that certainly would've been a good idea.  Been snapping pics left and right, and it never occured to me to take one of this!  D'oh!

I got it, though.  Instead of a BFH, it required an RTS.


Ok, I'll bite....  RTS=??

Really tough screwdriver?
Ridiculously tiny scraper
Raunchy Topless Stripper?
Red tool (from) Sears?
Really tight Squeeze?


Removing the Screws?

Rolling the Suzuki?

Ripping to Shreds?


HELP A BROTHA OUT!
Logged
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: Front axle removal -- could use a quick tip
« Reply #4 on: March 16, 2006, 11:18:50 AM »
Well, I had meant Really Tiny Screwdriver, but now that you mention it, a Really Talented Stripper probably could've gotten it off without using her hands.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
Pages: [1]   Go Up
« previous next »