Hello Guest

Exhaust plans......will this work?

  • 9 Replies
  • 3432 Views

0 Members and 4 Guests are viewing this topic.

*

Offline erik the red

  • 174
  • 0
  • Gender: Male
    • Cascade Adventure Guides
Exhaust plans......will this work?
« on: April 11, 2009, 06:01:53 PM »
Will a MagnaFlow direct fit catalytic converter, with 2.25" pipe and a Dynomax super turbo muffler work?
       
                                          AND

                                   2). Will it sound ok?? (i.e. somewhat deep, throaty growl, without sounding too "rocketish and annoyingly loud"?)

  Would be for a 1.6 16v Tracker.

Thanks much  ;D
1996 Geo Tracker
1987 Suzuki Samurai soft top
1987 Suzuki Samurai Tin Top
1972 Suzuki LJ20V

*

Offline Lindenmooch

  • 560
  • 0
  • Gender: Male
  • Just another paranoid android.
Re: Exhaust plans......will this work?
« Reply #1 on: April 11, 2009, 07:29:10 PM »
"Would be for a 1.6 16v Tracker. "

That should answer your question right there....

My own opinion...probably not.  Too small of an engine to get any sort of clean sounding throaty growl.

If you do try it....be sure to let us know what happens.



As far as it working....I don't see why not.   But the sound it makes might not be what you expected.

*

Offline Hillbillydave

  • 213
  • 1
  • Gender: Male
Re: Exhaust plans......will this work?
« Reply #2 on: April 11, 2009, 08:31:48 PM »
This is the 1.3L with a exhaust similar to what you describe, except with a glass pack and no cat...



I just uploaded it, might take a while to process it. i will post another one soon with a 4500 rpm run...

Video was to big to post on here.
'89 sidekick 1.3L 3" blue suspension parts, custom strut extensions 31x10.5 Mud Trac's on 10" rims rear fenders trimmed, lincoln locked rear, Rochester Carb on custom adapter
93 Sammy project, SPOA with 34's, 5.12's, welded, in the works

*

Offline erik the red

  • 174
  • 0
  • Gender: Male
    • Cascade Adventure Guides
Re: Exhaust plans......will this work?
« Reply #3 on: April 12, 2009, 09:09:43 AM »
Hillbillydave:

That sounds great! Exactly what I'm looking for. However, I am going to run a cat, cuz it's a DD. I have debated running a glass pack, but some say they are TOO loud?
1996 Geo Tracker
1987 Suzuki Samurai soft top
1987 Suzuki Samurai Tin Top
1972 Suzuki LJ20V

*

Offline Bryce132

  • 117
  • 0
Re: Exhaust plans......will this work?
« Reply #4 on: April 12, 2009, 11:11:19 AM »
"Would be for a 1.6 16v Tracker. "

That should answer your question right there....

My own opinion...probably not.  Too small of an engine to get any sort of clean sounding throaty growl.

If you do try it....be sure to let us know what happens.



As far as it working....I don't see why not.   But the sound it makes might not be what you expected.

Do you have much experience with exhaust applications? You can easily get a good tone out of a tracker. I have straight pipe from the stocker header back with just a cherry bomb installed on mine since i bought it, and it sounds pretty good for a Tracker. Not ricey or pinge' a small growl. Mind you will never get the sound of displacement (V6-V8) But with that set up, it should sound pretty nice, just what your looking for I beleive.

Bryce

*

Offline erik the red

  • 174
  • 0
  • Gender: Male
    • Cascade Adventure Guides
Re: Exhaust plans......will this work?
« Reply #5 on: April 12, 2009, 12:21:39 PM »
Excellent, thanks Bryce.
1996 Geo Tracker
1987 Suzuki Samurai soft top
1987 Suzuki Samurai Tin Top
1972 Suzuki LJ20V

*

Offline Zuken

  • 19
  • 0
Re: Exhaust plans......will this work?
« Reply #6 on: April 12, 2009, 05:02:10 PM »

                                   2). Will it sound ok?? (i.e. somewhat deep, throaty growl, without sounding too "rocketish and annoyingly loud"?)


Hi Eric,

I have an 88 Samurai, 1.3 L, with K & N MegaFlow filter, header, cat, 2" exhaust, Cherry bomb and it has a very nice sound (I like it anyway)  It is not too loud and is not tinny or rice burner sounding.

You can listen to it here:

88 Samiurai, SPOA 6 inch lift, 3.5" Bonz Shackles, Rear EZ lockers, 4.16 gears, Calmini OTS steering, 31" Truxus tires, Tri Mil header, Cherry Bomb, 2 " exhaust, RRO Front Bumper, extended shocks and shock mounts, Rock Biters, TT skid plate

*

Offline erik the red

  • 174
  • 0
  • Gender: Male
    • Cascade Adventure Guides
Re: Exhaust plans......will this work?
« Reply #7 on: April 12, 2009, 08:09:23 PM »
Right on, Zuken. Thanks for the audio clip!! Sounds great!
1996 Geo Tracker
1987 Suzuki Samurai soft top
1987 Suzuki Samurai Tin Top
1972 Suzuki LJ20V

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: Exhaust plans......will this work?
« Reply #8 on: April 13, 2009, 06:07:16 AM »
Drone637 just put a 2 1/4" exhaust and Thrush Turbo muffler on his SJ410.  It has a nice low growl to it, not bad for a 1 liter motor.  Has a small crackle when letting off at higher rpm's.   We used (3) 45 & (1) 90 degree angle sections and about 5 feet of exhaust pipe to weld up his system.  It had to wrap up around his new 4 link suspension.
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.

*

Offline norcalwreckchaser

  • 128
  • 0
  • Gender: Male
    • www.norcalwreckchasers.ning.com
Re: Exhaust plans......will this work?
« Reply #9 on: April 13, 2009, 03:26:19 PM »
I run a K&N filter in the stock airbox, Doug Thorley header, high flow cat and a 3 chamber Flowmaster it's not too loud and made a huge difference in mid rpm's and still passes Kalifornia smog requirements. I have had loud exhausts on small engines they may sound cool but for a daily driver the incessant buzzing can be annoying, just something to think about.
Norcal
86' Samurai, 5" spua lift, rear missing links, 4.57 gears, 4 to 1 Transfer Case, Lockrights F/R, ARB Front bumper, Doug Thorley Header, Rock Rails, GM alt. swap and other Misc. goodies.
Sold 7/10 :(