Hello Guest

axle gearing

  • 5 Replies
  • 1540 Views

0 Members and 1 Guest are viewing this topic.

*

Offline kirknd4spd

  • 333
  • 0
  • Gender: Male
axle gearing
« on: December 29, 2006, 11:23:06 PM »
i have an 89 sidekick 1.6 8 valve with an auto tranny, 4.62 gears, and 31" tires. i found some 5.62's from an 89 1.3 sidekick, but would that be too low of a gear for my 31's? would 5.12's be better? i daily drive my sidekick, and spend about an hour a day on the interstate. thanks!
89 Sidekick - 2 door soft top, 1.6, auto, 4x4, 3" suspension lift, 31x10.50's on 15x8 Mickey Thompsons, long tube header

*

Offline BigPig

  • 276
  • 0
  • Gender: Male
Re: axle gearing
« Reply #1 on: December 30, 2006, 02:37:12 AM »
If you decide they're too low how much would you want for them??  ;)

'89 Sidekick w/ 4.5" of lift.

*

Offline 4njeep

  • 113
  • 1
  • Gender: Male
  • I Love ZUKIWORLD!!!!
Re: axle gearing
« Reply #2 on: December 30, 2006, 03:46:29 AM »
yes that would be to low, sell them to me  ;)  j/k

i personaly think for highway driving you would be better off with the 5.12's.  With the 5.62 you would have no top speed, and would be reving over 5k rpm just to keep up with traffic. but, you could always go up to 33" tires  ;D
92 sidekick jlx auto
2" suspension lift
5.13 gears, locked rear.
30x9.5 goodyear mt/r's on CSA Scorpion's

*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: axle gearing
« Reply #3 on: December 30, 2006, 05:02:40 AM »
yes that would be to low, sell them to me  ;)  j/k

i personaly think for highway driving you would be better off with the 5.12's.  With the 5.62 you would have no top speed, and would be reving over 5k rpm just to keep up with traffic. but, you could always go up to 33" tires  ;D

I agree.  I run 5.12s, auto & 31s and turn about 4K RPM at 60MPH.  Would be even higher for the 5.62s.  But good with 33" I've heard before.  I'll trade ya my 5.12s, with or without rear locker & some $ for them! ;)
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed

*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: axle gearing
« Reply #4 on: December 30, 2006, 05:22:53 AM »
I manage to get about 67mph ( according to one of those "your speed is" highway signs,  at 3700 rpm. Thats with 31" AT's and auto with 5.13 gears. I guess the 16v is a bit better power wise though.  I'd drop in the 5.62's and be happy you found some! If not, I"LL BUY EM!
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER

*

Offline locjaw

  • *
  • 2045
  • 22
  • Gender: Male
Re: axle gearing
« Reply #5 on: December 30, 2006, 09:06:12 AM »
geesh, you guys are like a bunch of lions fighting over a wounded gazelle ::) >:D

ROTFLMAO

kirknd4spd....... personaly, if you are daily driving it and it is an auto you dont want to over gear it. i would pick up the 5.62 gears if they are a good deal. they can obviously make you friends or money around here, but i would give 5.12's a try first. if it isnt low geared enough then try the 5.62's. it only costs you some gear oil and a day of your time ;) and i wouldnt sell the 5.62's, you just might want to go bigger later (the evil seed >:D) and you WILL need them then
oh, and sorry to the pack of wild dogs waiting for you to show weakness :P :P :P :P ;D ;D ;D ;D

jason
« Last Edit: December 30, 2006, 09:26:30 AM by locjaw »
1995 Sidekick SAS'd "Trail Slayer"
1993 4 door lifted "Road Warrior"
1995 4 door stocker "CreamPuff"