Hello Guest
« previous next »
Pages: [1]   Go Down

Hood Scoop

  • 13 Replies
  • 3033 Views

0 Members and 3 Guests are viewing this topic.

*

Offline brentd27

  • 101
  • 0
Hood Scoop
« on: October 13, 2007, 04:45:43 PM »
Used this afternoon to put a hood scoop on my Tracker.  It's rather disconcerting to take the hood off your vehicle, mark it up, drill holes then cut into it with a jig saw, but I think the end result is worth it.

And yes, I know it's a hair off-center.  It's because of the construction of the hood (or at least that's my story and I'm stickin to it.)

If you're wondering about the brand of the hood, I don't really know.  It was $5 on E-Bay.  Wan one of the only ones I could find that claimed it could be made functional.

Anyway, here are some pics:

Logged
*

Offline justzukies

  • 88
  • 1
  • Gender: Male
  • I Love ZUKIWORLD!
Re: Hood Scoop
« Reply #1 on: October 13, 2007, 05:51:56 PM »
your vehicle looks to be fuel injected.  is the air run thru the air intake system?  better performance?  I read that some zukis came with a turbo diesal and factory hood scoop sold only outside the United States. l
Logged
94 kick 1.6 16V AT 4dr  Calmini 3" lift
*

Offline brentd27

  • 101
  • 0
Re: Hood Scoop
« Reply #2 on: October 13, 2007, 06:38:46 PM »
I took the factory air box out and stuck a cone filter on the end of the intake manifold.  The air from the scoop is just directed down over the top of the engine to help flush hot air out from under the hood.  Hopefully that will boost power a little bit by keeping the air that the cone sucks in a little cooler.

I used the space where the factory air box was to mount an aftermarket cruise actuator.
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Hood Scoop
« Reply #3 on: October 14, 2007, 11:22:31 AM »
Quote from: justus on October 13, 2007, 05:51:56 PM
I read that some zukis came with a turbo diesal and factory hood scoop sold only outside the United States. l


Yep, originally fitted to clear the Mazda 2ltr TD lump, it was also fitted on the later petrol models, like mine.

Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Ira

Re: Hood Scoop
« Reply #4 on: October 15, 2007, 06:11:48 AM »
What about just drilling a lot holes, instead of making the entire cut-out? Would that be enough?

I like the looks of the square scoops on the Track, and I see there a bunch of aftermarket ones available. My fear is that quality-wise, they look kind of cheap, and if you had to replace it in the future, I wouldn't want to be a slave to that exact same cut-out, know what I mean?

I just did a search and read that muddy water intake into the scoop can be a problem. Also the fact that it may not even do anything to help performance.

No offfroading for me, but we get a lot of RAIN. So is this a good idea for my truck?

If NOT, what about just sticking it on for looks, no holes or cutout at all?

My motto:

Style over substance.

« Last Edit: October 15, 2007, 06:17:56 AM by Ira »
Logged
*

Offline brentd27

  • 101
  • 0
Re: Hood Scoop
« Reply #5 on: October 15, 2007, 07:51:04 AM »
Well, I wasn't all that worried about muddy water since I don't off-road.  My primary concern is that my engine always feels like a nuclear reactor mid-meltdown after a long drive, even though my temp gauge says everything is fine.  These little engines just radiate a lot of heat, so my primary concern was getting more airflow through the engine compartment.  Have yet to make a long drive yet, so I don't kow how much difference it will make.

(My tracker is my daily driver until I get the engine in my Aztek reassembled.  I love odd vehicles.)
Logged
*

Offline SnoFalls

  • 1358
  • 3
  • Gender: Male
Re: Hood Scoop
« Reply #6 on: October 15, 2007, 08:06:08 AM »
I think if I was going to do a scoop, I'd do a cowl induction ... would help draw hot air out of engine compartment at speed, yet not capture dust/mud/etc when wheelin'
Logged
I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it
*

Ira

Re: Hood Scoop
« Reply #7 on: October 15, 2007, 08:08:19 AM »
Quote from: brentd27 on October 15, 2007, 07:51:04 AM
Well, I wasn't all that worried about muddy water since I don't off-road.  My primary concern is that my engine always feels like a nuclear reactor mid-meltdown after a long drive, even though my temp gauge says everything is fine.  These little engines just radiate a lot of heat, so my primary concern was getting more airflow through the engine compartment.  Have yet to make a long drive yet, so I don't kow how much difference it will make.

(My tracker is my daily driver until I get the engine in my Aztek reassembled.  I love odd vehicles.)

I'm kind of in the same situation--it's my daily drive, no off-roading.

Plus, it's HOT in South Florida, so how could getting more air flow in there hurt?
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Hood Scoop
« Reply #8 on: October 15, 2007, 03:17:43 PM »
We threw some vents made by Davesport on the top of a Sammy that was getting a little hot under the hood with the VW Fuel Injection swap.  They fit right on the hood and vent out a ton heat.

Sadly we don't actually have any pictures of them installed.  :p
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Hood Scoop
« Reply #9 on: October 17, 2007, 04:52:50 AM »
I did hood vents to help cool the engine compartment after the turbo install. Doesn't seem to be any problem in rain or off road, and they work very well.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Ira

Re: Hood Scoop
« Reply #10 on: October 17, 2007, 05:28:51 AM »
Quote from: Drone637 on October 15, 2007, 03:17:43 PM
We threw some vents made by Davesport on the top of a Sammy

Weird--I went to the Davesport site but didn't see any vents.
Logged
*

Offline nitromax

  • 206
  • 0
  • Gender: Male
  • FunZilla's alive !
    • NitroMax's Pages
Re: Hood Scoop
« Reply #11 on: October 17, 2007, 10:25:31 AM »
I put this small - universal - hoodscoop on my Sammie after putting on the Weber. It was just a little behind where the airfilter sits, to improve airflow from front to back of the enginecompartment. I put it on backwards to prevent rain and crap from blowing in and to have the best flow past the airfilter.



Now I've got Fuel Injection the airfilter is in a different place ( snorkel not attached yet ), but I kept it anyway, looks nice I think  ;)
Logged
1600 cc 8v, MegaSquirt EFI, Camden SuperCharger, Calmini 3" Shackle Reversal, IronMan 3"suspension lift, SPOA and 2"bodylift, 4.16 T-case, QuickLok rear, 33x12.5 ProComp XT's on 8"rims with 1"wheelspacers.

Check it all on : www.nitromax.nl
International editor |removethispart|@ www.izook.com
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Hood Scoop
« Reply #12 on: October 17, 2007, 10:36:51 AM »
Quote from: Ira on October 17, 2007, 05:28:51 AM
Quote from: Drone637 on October 15, 2007, 03:17:43 PM
We threw some vents made by Davesport on the top of a Sammy

Weird--I went to the Davesport site but didn't see any vents.

Just give him a call.  Steve saw some he had fabbed up and just called and asked him about getting a pair of them.  If you want I can get some dimensions and a price for you.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Ira

Re: Hood Scoop
« Reply #13 on: October 17, 2007, 11:43:46 AM »
Quote from: Drone637 on October 17, 2007, 10:36:51 AM
Quote from: Ira on October 17, 2007, 05:28:51 AM
Quote from: Drone637 on October 15, 2007, 03:17:43 PM
We threw some vents made by Davesport on the top of a Sammy

Weird--I went to the Davesport site but didn't see any vents.

Just give him a call.  Steve saw some he had fabbed up and just called and asked him about getting a pair of them.  If you want I can get some dimensions and a price for you.

I'll make a call, but what were the dimensions of the ones you put in? I'm guessing you put in two?

Seems like an easy, inexpensive upgrade with some real benefits.

It can be BRUTALLY hot down here, and even without taxing the engine all that much at all, we're talking heavy heat build-up. That extra air getting to the engine sounds like it can only be a good thing.

Logged
Pages: [1]   Go Up
« previous next »