Hello Guest

Parting Several TracKicks

  • 34 Replies
  • 5059 Views

0 Members and 17 Guests are viewing this topic.

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Parting Several TracKicks
« on: July 08, 2012, 08:49:41 AM »
This consolidates two previous posts and adds 2 other vehicles to the list.

These are mostly rust free Colorado trucks - located in Denver.

1991 2 door: Most everything available except the motor and front clip. The tub and chassis have been scrapped.
5 speed with transfer case $195, ECM $75, nice set of factory alloy wheels $95, doors, glass, fuel system, top hardware, interior parts and much more.

1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

1994 2 door: 1.6L 8 valve. Hear it run! $595 complete plus any and all wiring you need , 3 speed automatic transmission $150, 4.30 thirds (They haven't been pulled so I'm going off specs)$295 for for both. Some body parts.

1997 Sport Sidekick 4 door 1.8 L. Good motor $695, all body and interior parts, ECM $100, AC parts, Power Steering. This one suffered transmission failure - other than that it's straight and complete.

Offers considered - the more you buy the better the deal :-)
303 91 eight 944 five
Email Finboats|removethispart||removethispart||removethispart|@Gmail.Com
« Last Edit: July 10, 2012, 06:59:18 PM by Khodabear »
1997 Tracker
1997 X90

*

Offline krittergitter

  • 114
  • 1
  • Gender: Male
Re: Parting Several TracKicks
« Reply #1 on: July 10, 2012, 06:37:06 PM »
Just a little help here, your 96 should have 16 valve motor.

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #2 on: July 10, 2012, 06:58:51 PM »
You're right! The 8 valve is a 94.
I also have a '96 two door that has one weak cylinder. I'm not yet certain which direction to take with it as it's actually a fairly nice little rig. So I've not committed to parting it - but it's on my mind.
Thanks!
Peter
« Last Edit: July 10, 2012, 07:00:25 PM by Khodabear »
1997 Tracker
1997 X90

*

Offline zuki709

  • 190
  • 6
  • Gender: Male
Re: Parting Several TracKicks
« Reply #3 on: July 11, 2012, 05:20:27 AM »
how much would you want for the ring and pinion front and rear out of the 97 sport?
91 Samurai in many pieces
01 Tracker MUD CHILD's 2" suspension lift & 2" body lift. air lift air bag 1000 in front. 31x10.50X15 on stock samurai wheels.

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #4 on: July 11, 2012, 05:49:11 PM »
how much would you want for the ring and pinion front and rear out of the 97 sport?

This is difficult. Needless to say selling these would take it off its feet and I'm not a pro yard with a forklift. So it would have to be the last items I'd sell off of  it. Since this is the functional equivalent of selling the whole thirds I'd have to say $345 plus postage for both.
1997 Tracker
1997 X90

*

Offline airdreams1

  • 90
  • 0
  • Gender: Male
Re: Parting Several TracKicks
« Reply #5 on: July 11, 2012, 09:21:07 PM »

 "3 speed automatic transmission $150"
any idea on shipping to star ID 83669   
87 Samurai  soft top

*

Offline oneal

  • 38
  • 0
Re: Parting Several TracKicks
« Reply #6 on: July 13, 2012, 02:19:07 PM »
 Do you have the retractable seatbelt for the drivers side rear(just need the belt/retracter not the whole assembly.Also need a driver door cable that operates the window(manual)

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #7 on: July 13, 2012, 05:30:10 PM »

 "3 speed automatic transmission $150"
any idea on shipping to star ID 83669   

I replied before the outage but you might not have received it.
I have no idea - it would seem that a common carrier would have to be used.
If you care to pursue that please do so knowing that I'm happy to facilitate by palletizing and dropping it off at a shippers local dock.
1997 Tracker
1997 X90

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #8 on: July 13, 2012, 05:31:57 PM »
Do you have the retractable seatbelt for the drivers side rear(just need the belt/retracter not the whole assembly.Also need a driver door cable that operates the window(manual)

The seat belt part is available - the drivers side window...I'll have to open the door up and see how it is. The window is a bit sketchy but it does work.
1997 Tracker
1997 X90

*

Offline tuxblacray

  • 930
  • 20
  • Gender: Male
  • Building a Bigger Better Brute Samurai.... B-}
    • Tuxblacray Photos
Re: Parting Several TracKicks
« Reply #9 on: July 15, 2012, 03:24:16 PM »
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.
I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux.....  ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts

*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: Parting Several TracKicks
« Reply #10 on: July 15, 2012, 04:55:53 PM »


1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

Just an FYI....
4 speed autos are found in 4 doors.
3 speed autos are found in 2 doors.
So if that 94 is a 4 door, like you list, then it will have a 4 speed, not a 3 speed.
Tracker and Sidekick parts for sale.....PM me with your wants/needs.

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #11 on: July 15, 2012, 05:29:08 PM »


1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

Just an FYI....
4 speed autos are found in 4 doors.
3 speed autos are found in 2 doors.
So if that 94 is a 4 door, like you list, then it will have a 4 speed, not a 3 speed.


Shows you what I know  ::)
Thanks for the correction!!!

1997 Tracker
1997 X90

*

Offline Khodabear

  • 155
  • 2
  • Littleton Colorado
Re: Parting Several TracKicks
« Reply #12 on: July 15, 2012, 05:38:41 PM »
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.

$20 plus postage I'd like to think they'd fit in a medium FRB for $11
Photo attached to be sure this is what you mean
1997 Tracker
1997 X90

*

Offline tuxblacray

  • 930
  • 20
  • Gender: Male
  • Building a Bigger Better Brute Samurai.... B-}
    • Tuxblacray Photos
Re: Parting Several TracKicks
« Reply #13 on: July 16, 2012, 11:44:10 AM »
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.

$20 plus postage I'd like to think they'd fit in a medium FRB for $11
Photo attached to be sure this is what you mean

Yep that is them. I am gonna try to switch mine from side to side which will reverse the button location 1st. If that doesn't work out I will be in contact.

                                                                    Thanks, Tux...
I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux.....  ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts

*

Offline airdreams1

  • 90
  • 0
  • Gender: Male
Re: Parting Several TracKicks
« Reply #14 on: July 20, 2012, 11:42:56 AM »
ou have pm on the 3 speed trans....

i know ill need the trans, shifter, linkage, torque converter & ?   
(if anyone kn0ows what else is needed to put it in a sammy please pm me.)
87 Samurai  soft top