Hello Guest
« previous next »
Pages: [1]   Go Down

Rocker !!!!

  • 8 Replies
  • 3323 Views

0 Members and 3 Guests are viewing this topic.

*

Offline RHodge

  • 523
  • 0
  • Gender: Male
Rocker !!!!
« on: March 06, 2010, 03:29:57 PM »
stated to make new rocker panels for the sami / the goal was to make them strong but also look good , so i had a local shop bend up some 3/16. I caped them with the same and welded some plates across the back. I'm not going to weld them to the body just to the frame them I will use body seam sealer









Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Rocker !!!!
« Reply #1 on: March 07, 2010, 06:02:04 AM »
Nice! ;)
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Bobthebiker

Re: Rocker !!!!
« Reply #2 on: March 07, 2010, 04:19:31 PM »
Very nice looking.  Did you cut the rockers out or were they fastened in somehow on yours?   I want to do this to mine, but I'm undecided how to go about it.
Logged
*

Offline RHodge

  • 523
  • 0
  • Gender: Male
Re: Rocker !!!!
« Reply #3 on: March 08, 2010, 05:29:59 PM »
I cut them out , it now is attached to the frame in three spots I'll try to take some pics later tonught
Logged
*

Bobthebiker

Re: Rocker !!!!
« Reply #4 on: March 08, 2010, 08:10:09 PM »
thanks!   I honestly think those look sweet on there.    now my next big question.  how'd you manage to cut such a nice straight line across both sides?
Logged
*

Offline RHodge

  • 523
  • 0
  • Gender: Male
Re: Rocker !!!!
« Reply #5 on: March 10, 2010, 08:35:25 PM »
I cut it along the piece that holds the plastic rocker covers,  should have taken a picture
Logged
*

Bobthebiker

Re: Rocker !!!!
« Reply #6 on: March 10, 2010, 10:18:53 PM »
definitely would have been nice.  but whats been done has been done right?       I'm still debatng how to do this on mine.

would you mind giving me some dimensions of your rockers? and maybe some pictures of how they're attached?
Logged
*

Offline RHodge

  • 523
  • 0
  • Gender: Male
Re: Rocker !!!!
« Reply #7 on: April 04, 2010, 08:47:09 PM »
Quote from: Bobthebiker on March 10, 2010, 10:18:53 PM
definitely would have been nice.  but whats been done has been done right?      I'm still debating how to do this on mine.

would you mind giving me some dimensions of your rockers? and maybe some pictures of how they're attached?

here is some dimensions

I cut the front at a 45 and the rear about 30 the caped them

I started with a 48" and they ended up being 47" total length
I'll posted some pic of how I'm mounting them next week

Ryan
« Last Edit: April 05, 2010, 05:49:47 PM by RHodge »
Logged
*

Bobthebiker

Re: Rocker !!!!
« Reply #8 on: April 08, 2010, 12:14:01 AM »
awesome! thank you!     I think if these are powdercoated in a color to match your rig, they can look REALLY good.  odds are if I build a set of these, that'll be what I do, is powdercoat em black or something to make the SE stand out.
Logged
Pages: [1]   Go Up
« previous next »