So I've been meaning to get something up so here it is...
 

 here's the starting point...  

your going from a 1.6 auto rig to a 2.0L 5 speed correct?

yes, here's some pictures of the one inch body lift, wheels and 31/10.5-15's installed.. tomorrow I will spend some more time on here explaining what I did and more pictures!

did you use a kit?..i did a 1.8l swap in my 94 2-door,..basicly the same as your 2.0l,.i did the wiring myself and built the motor mounts etc...curious how yours went

 I built the motor mounts myself, and have a wire genius doing the wiring,(living in the portland OR area it needs to be smog legal), also, I converted it from an four speed auto to a five speed manual, I used a custom flywheel from trail tough, centerforce clutch to handle the abuse and the turbo that i plan later on...

I built the motor mounts myself, and have a wire genius doing the wiring,(living in the portland OR area it needs to be smog legal), also, I converted it from an four speed auto to a five speed manual, I used a custom flywheel from trail tough, centerforce clutch to handle the abuse and the turbo that i plan later on...

kool,..i live in the portland/gresham area too..i did the same trans swap using the same flywheel from tt...i just got done with mine a month ago...

I've been trying to get some more pictures up but having trouble uploading.. i think they are too big..

Ya'all otta hook up for some idea sharing and some show&tell

Image editing anyone???

BTW that's a good looking dog in the first pic!

BTW that's a good looking dog in the first pic!

Just looks like a lab to me

its actually 3/4 lab and 1/4 German Sheppard. bit of inside joke  BRD HNTR. its my dog! ~jluck

For some reason every time I try to upload more pics, when I click post it says my session has timed out... only taking about 30 seconds before I attempt to post, any answers??

its actually 3/4 lab and 1/4 German Sheppard. bit of inside joke  BRD HNTR. its my dog! ~jluck

"Just a lab" was meant as joke too.  I figured something was up to point it out.
It is always interesting watching a build take off, and wondering which way it's going to go and how far.  Keep up the good work, and keep the photo's coming.

yes, here's some pictures of the one inch body lift, wheels and 31/10.5-15's installed.. tomorrow I will spend some more time on here explaining what I did and more pictures!

whats the deal with that front bumper looks like custom or crappy bolt on?

that would be because its not finish welded. and watch the dissing of other stuff!!

I've been trying to get some more pictures up but having trouble uploading.. i think they are too big..

still having issues uploading??...where ya at?..i can swing by and snap some for ya