Hey guys finaly got around to it. I started the Intake manifold for the blower to work with the 2.5 V6 for the vitara. We are hoping at 6psi 300 whp and at 10-12 psi 400whp.

If everthing goes well i may make a few kits . And it will clear the stock hood.

Pics of what i got so far ill start building the intake tomorrow

Stop teasing and post the pic's!

LOL!

I have a 7000 mile 2.7 liter that really wants to be boosted!


Sean

Lol im waiting on the pulley and some other stuff.

If the kit work well ill make a few with engine management and so forth.

Pics very soon .

Raced a sir from a dig tonight and the gv held its ground lol

Only vid or pics i have of the truck now.

hey man i might be interested in a kit if you can get it to work i have the 4 cyl 2.ol though  also i have been at that track  nice run keep me informed if you are going to make any thing for the 2l

Which blower?  I have one from a S/C'd Toy Previa (2.5L motor) and wanted to use it on the GV.

The first one will be a M62 I have a M90 for the next setup

The first Setup will be non intercooled. The next one intercooled possible M90. Ill see how the motor performes

If you are taking names for persons interested in the H25 kit, add mine. The more complete the kit is, the better as far as I'm concerned.

Gary Hebenstreit
303-594-9737
ghebenstreit|removethispart|@msn.com

OK guys.

Here it is . The intake manifold is not to bad of a challange to build few hours of fabbing and welding and the front engine bracket.

Now the engine management is the problem. I have a standalone. Im going to see what options i can figure out to keep the cost down. I can do a FIC and see from there.

Ill know more this week i get my flanges friday.

Im going to be testing this kit all winter. See how it fairs out.

Now i have a member on the board that is going over seas tomorrow and is back in april or may Ill be putting a kit on his truck and do a how to. It will be a full bolt on.

To save money on the kits ill give you guys a part number on the blower i am using u can get at a wrecking yard or on ebay.

Josh

so were are the pics of the intake???

any updates

Sorry guys still waiting on the flanges and i had to change the design the tunnel where the blower mounts is a bit tight. Stock strut tower brace will not be able to be used. Im trying to make it as compact as possible im starting the wood mold this weekend ill post pics on friday.

how do you plan to clear the a new higher strut tower brace and the hood?

Will clear hood strut tower brace will have to be a 3 point or we will see.